Masso USB Configuration (solved with link)

[poppyscott (Don Scott)]

I have looked and looked but can’t find it. What is the formatting type for a USB to be compatible with Masso?

[OnefinityCNC (Onefinity Support)]

Elite Masso USB Disconnects Troubleshooting FAQ

If you are experiencing USB disconnects on the Elite Masso, please go through the following troubleshooting steps. Basic testing includes checking: Try a different USB stick (must be 32gb or less with FAT32 formatting). If any additional hardware has been added to the machine and if so what it is? Do you you have a spindle installed or Makita router? There are 2 power outlets on the back of the power supply. What is connected to them? If one outlet is used for dust collection, then test runs wi…

[TMToronto]

https://docs.masso.com.au/getting-started-guides/installing-masso/loading-software-to-masso-g3

… short answer … FAT32 using MBR not GPT

[OnefinityCNC (Onefinity Support)]

and less than 32gbs.

[TMToronto]

Interesting information - I had not read that before.

[poppyscott (Don Scott)]

I had read somewhere that you also needed to use a specific formatting type in addition to the fat 32.