Hi, I’m a new user of the OneFinity Machine (X35 with stiffy) although not new the CNC world in general. I might be dating myself but I used to be a CNC Programmer for large industrial CNC machine (typically Fanuc controls). In those days you would still largely program manually in Gcodes. Because of that manual process you would unfortunately be prone to Gcodes errors in programming. One feature that was great to have to avoid crashing your machine and whatever damage comes with it, was having a Speed and Feed override buttons, one would control the RPM from 0 to 150% and the other, the Feed rate from 0 to 150%. The RPM and Feed controls where rotary dials on the controller and were used to compensate for improper RPM speed and Feed in the program during the machining operation. Granted that for most users the RPM control can be mostly done directly on the router BUT the most practical feature was the feed control, when running the program, you would could bring it down close to 0% to slow it down and see if it was actually going where you wanted to be. If not, bring it to 0% to stop it from moving, avoid a crash and could and this point stop the program to correct the programming error. Two questions: Is there currently such a feature on the 1F machine with the Buildbotics controls? If not, are there other users that would think this would be a great upgrade to have? Thank you in advance.

It will never happen. We investigated and did a LOT of code changes, and it broke everything.

Hey Pierre, you can use the search function. [image]Feedrate override? unfortunately feedrate override is not possible with the Onefinity Controller (it is a feature requested), but with the Masso G3 Touch of the Elite Series. What is possible with some VFDs, is Temporarily Overriding Spindle Speed.

Hello. Any updates on the availability of feed rate control on the fly with the Buildbotics controller? gSender does this on my Shapeoko, and it is a VERY useful feature! Thank you!

Override Control for RPM(Speed) and Feed

Original/PRO Series (Buildbotics) (Gen 1)

349iq2345 February 26, 2023, 10:22pm 2

Hey Pierre,

you can use the search function.

Topic		Replies	Views
Feedrate override? Uncategorized	3	969	February 19, 2023
How did I. Change feeds while in mid carve? Uncategorized	4	370	April 1, 2024
Feed rates change between Vcarve and Onefinity controller (solved) Uncategorized	5	354	May 18, 2024
Feed Rate on the Fly Controller (Buildbotics) Discussion	3	779	June 2, 2021
Editing GCode on the fly Original/PRO Series (Buildbotics) (Gen 1)	8	914	August 10, 2023

Override Control for RPM(Speed) and Feed

Related topics