Regards au 240 volt machine and spindle

Gen 2 Elite Series
1

re:- 220v

  • 220V Version (UK/EU/AUSTRALIA/Etc.)
    Requires a 20amp (breaker) for the machine and controller.

  • A VFD/Spindle must always be plugged in directly to wall power. It will require it’s own breaker (making a total of 3 breakers) at whatever specs the VFD/Spindle manufacturer recommends.

  • “I am in Australia and we have 15 amp fuses and 10 amp fuses . does this become a problem I’m in Australia.” ???

  • Pat

2

mmmmmm answered are defining . sent an email with no answer either very vague! shame

3

Sorry no one responded back to you.
I have the 220 volt spindle in Canada and it required a 15 amp breaker.
See previous post

I have 3 dedicated circuits for the machine a 110v for the machine, a 220v for the spindle and a 110v for the vacuum.
If in doubt contact a licensed local sparky

4

A 15 amp breaker is required. (this information is listed in the manual)