Setting limits when levelling my spoilboard

[OnefinityCNC (Onefinity CNC Official ✅)]

Your original woodworker limits are 32x32 (cutting area). You should never change the soft limits in the machine.

This faq will help you. Read it and watch the two videos in full:

Help! My Toolpath says 'Under' or 'Over" (BB controllers) OR 'Soft Alarm on AXIS" (Masso controllers)! (with videos)

While this FAQ was originally wrote for the Non-Elite Machines, the same principal applies to both. Over/under on non-elite controllers and soft alarm on elite controllers mean the same thing, so the below principals apply to all machines. Many new users to the Onefinity CNC often get the machine unboxed, assembled, and moving in a few minutes without ever needing to look at instructions. But then they home the machine and are alarmed when their screen looks like this: (Left picture is non-e…