Cutting some G10 with a 1/4" carbide bit, 2 flutes. I noticed on the first pass, there is a perfect 1/8" step, see pics. Simulation and file look good, my only assumption is the traverse speed is too fast on the Masso. Any help or tips would be greatly appreciated. This is my first real project on the new Onefinity elite foreman. I’ve got good dust collection setup for this and wearing my respirator while cutting this stuff.
Here’s my gcode too:
(VECTRIC POST REV.)
(B434F9E32686CE962F16018E5A723285)
T1M6
G17
G0Z0.8000
G0X0.0000Y0.0000S18000M3
G0X0.8620Y0.8283Z0.2000
G1Z-0.0667F20.0
G1X1.0698F50.0
X1.4448
X2.7901
Y2.0347
Y2.4097
Y3.5196
X1.3998
X1.0248
X0.8620
Y0.8283
G1Z-0.1333F20.0
G1X1.0698F50.0
Z-0.0750
X1.4448
G1Z-0.1333F20.0
G1X2.7901F50.0
Y2.0347
Z-0.0750
Y2.4097
G1Z-0.1333F20.0
G1Y3.5196F50.0
X1.3998
Z-0.0750
X1.0248
G1Z-0.1333F20.0
G1X0.8620F50.0
Y0.8283
G1Z-0.2000F20.0
G1X1.0698F50.0
Z-0.0750
X1.4448
G1Z-0.2000F20.0
G1X2.7901F50.0
Y2.0347
Z-0.0750
Y2.4097
G1Z-0.2000F20.0
G1Y3.5196F50.0
X1.3998
Z-0.0750
X1.0248
G1Z-0.2000F20.0
G1X0.8620F50.0
Y0.8283
G0Z0.2000
G0Z0.8000
G0X0.0000Y0.0000
M30