USB Thumb Drive Size

[DanMichSr (Dan)]

This was asked before but there wasn’t a answer to that persons questions. What is the maximum size of a usb drive that the controller can work with. Would like to include all my projects on one drive in folders etc.

[OnefinityCNC (Onefinity CNC Official ✅)]

File Format For Loading Files onto a USB stick (Buildbotics)

This only applies to the buildbotics controller. If your going to use a usb stick to load your gcode files, make sure your usb stick is either partitioned in the NTSF or FAT32 format. Using any other file type may not show files on the controller. USB sticks must be 2.0. USB 3.0 sticks may not be detected. Some USB sticks larger than 32GB may not work with the raspberry pi. We recommend using a USB stick, 32gb or less. We do not recommend using an SSD. File names must not include the . (d…