Vcarve pro and onefinity post processor

[Dwc (Dustin Cole)]

Jtech Laser Post Processors for Vectric (Download Links Included) (Old thread, built into Vectric 11.0 and beyond)

If you are running Vectric 11 or newer, these are built into Vectic and you do not need to download and install these. Updated 6/17/21 Version (2.0): Onefinity Laser (Inch) V2.pp (4.9 KB) Onefinity_Laser_mm_V2.pp (4.9 KB) Install these to use the Jtech Laser add on when using Vectric.