[Height] New to the forum, sorry if this is in the wrong place. I just bought an X-50 Journeyman, like 2 days ago. I have some time before it arrives, and I Plan to build a table prior to it arriving, but I have a slight height restriction where I want to put it in my garage and im debating an en…

Not near my machine at the moment but don’t be tight on your height as you’ll need room for dust collection hose which will arrive from above unless you have a different design.

That measurement is actually not really important. You are most likely going to have some sort of dust collection so you’ll want at least a foot above the top of the Z stepper. Personally I would want at least 2 1/2 feet above the table so I don’t feel cramped. I have over 3’ and it feels like I …

Where does this state the overall height?

I’m using a router, and it is important I’d I have a maximum height limitation. That’s why I’m curious. I want to get my table built prior to it arriving.

I would like the dimension as well. I am designing a table that will flip vertical for storage and that projection is important to me.

Hey Alan, hey all, I do not have my machine yet but as far as I studied the docs and pics, I think the overall height of X-50 does not differ from X-35, since the Z Axis’ Gantry Slider Frame is the same (is it?) and its stepper surmounts the X Rails, so it is the highest point. As we can read in t…

[image] Alphonse: I would like the dimension as well. I am designing a table that will flip vertical for storage and that projection is important to me. [image] Dr-Al: My water cooled spindle sticks up above the stepper motor and when homed it’s about 24" above the table on my woodworker. …

The top of the Z stepper on my woodworker is 18 1/2" from the table. That’s from the bottom of the Y axis feet and the top of the stepper motor. It doesn’t account for the router or spindle sticking up above the Z stepper when the Z axis is homed. Few people have a Journeyman (since the rails are…

[Journeyman_cad1] [Journeyman_cad2] I had built a Onefinity in F360 before the Journeyman came out while I waited on the 80 mm spindle. When they announced the Journeyman, I took the known dimensions like the 50 mm rails and made some wild assumptions and used the provided images as canvases. A…

X-50 overall Height?

Original/PRO Series (Buildbotics) (Gen 1)

OnefinityCNC (Onefinity CNC Official ✅) August 23, 2021, 6:14pm 4

Topic		Replies	Views
Overall height of journeyman	1	999	August 27, 2021
1st post. Size matters and vertical clamping for finger joints & tenons	5	2606	January 14, 2023
X-50 Woodworker Footprint Original/PRO Series (Buildbotics) (Gen 1)	6	1990	July 9, 2021
X-50 Journeyman full machine footprint Original/PRO Series (Buildbotics) (Gen 1)	1	4696	June 22, 2021
Height of X50 Y-axis black bracket (feet)	0	285	November 2, 2022

X-50 overall Height?

Related topics