We do not support aftermarket, unsupported items (like your spindle), which is stated many places.
Tech support is limited until your able to have your machine in a factory configuration, with the Makita router.
After you return the machine to supported configuration, and if a part is defective determined by support, it will, of course, be covered under warranty!
Spindle shim sold here (physical and digital file available):
Citations:
12/5/23
What Spindle/VFD/ATC should I buy for my Onefinity?
Basically, there’s 3 options:
PWN cnc
Sola Fide designs (maker of Nighthawk Dust boot)
do it yourself (youtube) (most via amazon)
These are the majority of what users purchase. Please check out their own groups/forums, as they’ll be best to answer your aftermarket spindle related question’s.
Technical Support and Warranty
One important point to consider is that Onefinity does not offer any technical support for spindles of …
and
This FAQ is directed at new users to cnc routers.
Often, we get asked, which should I get, the Makita router or a spindle? This faq is designed to help answer that question for you. Each individual can come to a different conclusion. There is no one right answer.
Technical Support and Warranty
One important point to consider is that Onefinity does not offer any technical support for spindles of any kind (including any RJ485/breakout board/timeout issues). If you go with a spindle, you will …
and
We get many questions asking what we recommend in terms of machine, wasteboard, bits, router, software, monitor etc. We’ll try to answer that in this FAQ.
There are more advanced answers (and workarounds) to some of these points, but this is the easiest, general, beginner friendly, answers we can give.
Machine (required)
Let’s start with the machine. We’d always recommended getting the largest one you can fit. You can always cut smaller pieces on a larger machine, but (generally) you cannot…
1 Like