Alternative to Suckit or PWN Dust Boot

[AndyP (Badger)]

Not an easy subject. I prefer the suckit, zslider mounted spindle; suction good, visibility good, no crushed brushes (and inflight adjustment). See below

I need dust collection boot system for 80 mm spindle

An extension on the above. I have reverted back to the Suckit Dust Boot with a few modifications; 2->4in vac-adapter and new shields. I initially used my Suckit dust boot with my Makita router when I first received the 1F Summer '21; I stepped down my 4in vac hose to 2in hose to fit the Sukit. All worked well for a while then I bust the shield insert (they are very brittle acrylic). I continued using it without a shield and even more so when I installed my 80mm spindle as the suckit shield …