Hi AndyP. You have this gcode inserted:
- because you are using the ‘MASSO Onefinity Community Edition’ (check your NC Program POST in fusion - ref red rectangle in my image).
- because the post property option ‘Spindle Running Check Enable’ is Checked. (see green rectangle in my image).
This community edition require that your VFD is connect to masso controler ( see github Readme ) so the masso controler is able to detect if the spindle is running or not and will continu automatically or stop if manual intervention is required.
- If your VFD IS NOT connected to masso, I recommend to use native onefinity masso post processor instead.
- If your VFD IS connected to masso, I recommend to uncheck post properties options (see green rectangle) related to spindle start and stop.
