Day 7 Bonus! Faster Elite Sereies Rapid Speeds - 600ipm

Announcements
1

All ELITE Series machines now shipping at 600ipm!

Increased Speed, Now at 600 Inches Per Minute

When we first launched the Elite Series machines, we preset the rapids at 400 inches per minute to be conservative. The Onefinity Elite Series has always been capable of performing higher rapids and higher cutting speeds. The limiting factor has always been the router. With the addition of the Onefinity Spindle Kit by Redline Spindle you can unlock more of the Onefinity Elites potential. We have also improved the stepper resolution to produce incredibly smooth operation.

All Ultimate Package machines will ship with rapids of 600 inches per minute . No other CNC on the market can do what the Onefinity Elite Series can do!

(All Elite Series will now ship with the increased rapid settings of 600 IPM)

If you have an Elite machine, go to the F1 page, on the lefthand column double tap X-Axis and set maximum feed rate to 600 inches/minute or 15240 mm/min.

Repeat for Y axis.

Reboot and enjoy faster rapid speed!

1 Like
2

Any chance of the Pro Series being able to benefit from improved stepper resolution as well or is this only for the Closed Loop motors on the Elite machines?

3

You could over volt them, add drives, or build a new controller for a new experience. The axbb-e for example. But you wouldn’t have support from onefinity.

4

no, completely different drive systems and electronics.

1 Like
5

Ok. Thank you for the information. :frowning_face:

1 Like
6

I’m happy with the 400 IPM for X and Y
What about Z ?
When jogging the Z is so slow as compared to X and Y