Received my machine 2 weeks and started to set it up post making my table!!! Everything worked great until setting up the spindle. Completed setup and ran home position several times and jogged randomly Trouble started from here Connected the spindle and all connections and checked several …

Worked with the incredible support of Onefinity and Redline to solve the problem. The issue in short: Motion Controller was not recognizing the USB connection Redline Troubleshooting: Your HMI is not connecting to the motion controller. On your HMI screen, in the bottom right is a USB logo. If th…

Look here [image] Redline Error code 14 (solved, link in comments) toolboxOnefinity Spindle Kit by Redline CNC Just assembled my new Onefinity with the Redline spindle and controller. I am getting Error code 14 on the DRO. I have tried all the possible resolu…

Thank you for the feedback. I walked completely through the Error Code 14 recovery with no success. I am wondering it is a USB cable issue since the USB Disconnected is always flashing. Must be part of the com issue. If I disconnected the VFD and USB from the RTS-2 the HMI work after a power cycle. …

Try the usb to a computer and see if the rtx box will connect to the pc/mac software

Err14 with Redline Spindle/Com Error/USB Disconnected

Gen 2 Elite Series

Ken5 May 10, 2026, 9:47am 2

Look here

Topic		Replies	Views
Redline Error code 14 (solved, link in comments) Onefinity Spindle Kit by Redline CNC	5	369	April 13, 2026
Redline DRO displays Error 14 (solved) / DRO mounting holes (solved) when used in conjunction with the Redline Controller Onefinity Spindle Kit by Redline CNC	9	268	October 18, 2025
Apprentice Spindle communication Error Apprentice Series (Gen 2)	5	117	March 16, 2026
Redline RTS-2 No COM detected error Controller (Redline) Discussion	4	101	April 25, 2026
How to Address a Redline Spindle Communication Error and Error 14 (FAQ) Redline Spindle FAQs	0	66	March 30, 2026

Err14 with Redline Spindle/Com Error/USB Disconnected

Related topics