Error with xy position

[Aiph5u (Aiph5u (not affiliated with Onefinity))]

Hey Lee,

@Aiph5u

@Aiph5u

as long as you have not created a g-code toolpath of your own, uploaded and selected it in the machine, and probed or manually set your workpiece zero coordinate, this is not an issue and can (must) be safely ignored.

If you have created a g-code toolpath of your own, uploaded and selected it in the machine, and probed or manually set workpiece zero coordinate, then this error tells you that your g-code toolpath wants the machine to mill outside its workspace, which will in no case go. In this case, either your 3D model is too big, or you’ve probed or set manually your workpiece zero coordinate in the wrong position.

This support document may help you:

• Help! My Toolpath says ‘Under’ or 'Over"! (with videos)

Remember that the zero coordinate of your 3D model must be located at the same position as on your real blank. If you have your workpiece origin (=workpiece zero coordinate) on the bottom of your 3D model, you must probe from machine bed. If you have your workpiece origin at the top of the 3D model, you must probe on the top of your blank.

---