This is the factory test file used for Gen 2 Elite Series with @Redlinecnc controllers.
Bit Used:
Files uses a 1/4” (downcut) endmill.
Job Setup:
Gcode :
Elite Gen 2 Test Carve Redline Controller .ngc (19.5 KB)
DESIGN FILES:
V Carve Pro 12.5
Elite Gen 2 Test Carve.crv (182.5 KB)
Asprie 12.5
Elite Gen 2 Test Carve.crv3d (194 KB)
Carveco
Elite Gen 2 Test Carve.art (1.2 MB)
SVG Below (right click, Save As)
