Does anyone have a photo of the wiring from the gx16 cable to the wj200 they could share?

Hey Brenden, I don’t have a photo documentation (although planned), but here you can see the WJ200-specific pins that you have to use: Internal Masso Spindle Control InterfaceFunctionGX12 6-pin connector on back of Elite Masso G3 Touch (internal wire colors)Wire color and pin on VFDs Hitachi …

Gx12 sorry. From the display to the Vfd

You mean from the Masso G3 Touch CNC Controller to the VFD, this is here under FAQ: VFD/SPINDLE wiring schematic for Elite Masso machines Directly at Masso Documentation there are also these pages which explain what the cables are for: Spindle VFD Examples – Masso Documentation For the other c…

Thanks. I’m familiar with those, looking for photo documentation or YouTube as people have done for the HY.

Thank you that is helpful, no pin 4 then?

Hey Brenden, oops, there is a line that is lacking. Sorry! Goes to “L” too. Will correct the table above tomorrow. EDIT: I corrected the table above.

So only the green pin is left out?

Hey Brenden, the white (pin 5) is not connected: [Screenshot 2023-04-14 103015] Note that your cable may have different colors. Relevant are the pin numbers of the connector.

Hey Alpha1172, however the VFD you show is no Hitachi WJ200. Welcome to the forum!

Hitachi WJ200/Omron MX2 wiring to Masso GX12 6-pin connector

Spindle/VFD (Aftermarket/Unsupported)

349iq2345 June 4, 2023, 10:30pm 2

Hey Brenden,

what do you mean with GX16 input?

Topic		Replies	Views
Huanyang VFD wiring to Elite Masso G3 Touch Spindle/VFD (Aftermarket/Unsupported)	10	2591	December 30, 2024
Skip the GX12-6P connector and go direct? Spindle/VFD (Aftermarket/Unsupported)	18	1327	February 9, 2024
Wiring H100 or V70 VFD to GX-12 6-pin spindle control on Elite Masso G3 Spindle/VFD (Aftermarket/Unsupported)	40	4497	January 29, 2025
Hitachi WJ200 wired direct to Masso G3 Spindle/VFD (Aftermarket/Unsupported)	0	361	February 16, 2024
Spindle connection on Masso Elite Series (Masso & Redline) (Gen 1)	4	1957	April 4, 2023

Hitachi WJ200/Omron MX2 wiring to Masso GX12 6-pin connector

Related topics