How do I undo the upgrade to 1.1.1? And should I go back to the previous version or the new 1.2?

[image] How to reflash the operating system on the Onefinity BB controller (Full SD card image) Full SD Image There are times when you may have a file go corrupt or (advanced) users start poking under the hood and may need to reflash the entire vanilla image to the sd card…

Have a look at this page you will find all the info for you [image] Firmware Update 1.2 Beta (12/5/22) (Outdated Firmware) Outdated Firmware Updated 1/31/23 THIS IS BETA FIRMWARE. DO NOT INSTALL IF YOU ARE IN A PRODUCTION SITUATION. This release helps us col…

Hellbuff, I installed the 1.1.1 and am sorry I did. All I have had was problems. I am waiting for my Anker so I can reflash the SD Card to either 1.0.9 or 1.2. I have not decided yet but have both. Once I installed 1.1.1 I get error messages and cannot cut. So I am sitting and doing nothing.

Before I start taking apart the controller and installing software to flash back and update manually, do we have any idea when 1.2 will be released (after beta) for wifi update?

Regarding flashing… I had gone from 1.0.9 to 1.1.1, had issues. I went back to 1.0.9 but never flashed. I understand that you can go from 1.0.9 to 1.2 but I was concerned about having any residual issues from the back and forth, and wanted both a clean install and clean peace of mind. I followed …

Did you have an issues when you avoided flashing and went back to 1.0.9? I was mislead by several YouTube videos of people downloading the 1.1.1 firmware so I did it myself yesterday didn’t have it downloaded for more than 5 mins before I read not to do it, I’m not gonna trouble myself with reflashi…

Hi Jacob - I did not have any trouble going back to 1.0.9 without flashing. I think is froze one time after that, which in my mind I was worried that it was not the same 1.0.9 as before, but I have run. 1.0.9 for months after and it was the same rock steady system as before. I will say, I have run…

How to reflash the operating system on the Onefinity BB controller (Full SD card image) There are times when you may have a file go corrupt or (advanced) users start poking under the hood and may need to reflash the entire vanilla image to the sd card. This process is essentially reinstalling th…

It is the ONLY complete way to undo 1.1.x family of firmware. No, you cannot ‘update’ back to 1.0.9 via a usb flash drive. answers were here: [image] Firmware Update 1.2 Beta (12/5/22) (Outdated Firmware) Outdated Firmware Updated 1/31/23 THIS IS BETA FIRMWA…

I did the update to 1.1.1 before I found out about the bugs. I watched the OninintyCNC video on how to reflash the firmware. It was very simple and straightforward. The only issue I had was that the video shows the top cover of the controller sliding back far enough so that you can pull out the SD c…

How to undo the upgrade to 1.1.1

Original/PRO Series (Buildbotics) (Gen 1) Controller (Buildbotics) Discussion

OnefinityCNC (Onefinity CNC Official ✅) January 4, 2023, 7:10pm 6

Topic		Replies	Views
Firmware 1.2.1 back to firmware 1.0.9 Firmware (BB Buildbotics) (Discontinued)	2	705	February 23, 2023
Original Journeyman 48x32 BB controller firmware needs updated from 1.0.8 to current	3	165	January 30, 2025
Downgrade my Update Original/PRO Series (Buildbotics) (Gen 1)	4	1155	December 11, 2022
I need help with firmware update…v1.0.9 to v1.2.1 Firmware (BB Buildbotics) (Discontinued)	4	824	August 3, 2023
Firmware update help	1	1140	October 21, 2021

How to undo the upgrade to 1.1.1

Related topics