Firmware (Buildbotics)
Outdated Firmware Updates Firmware here is outdated. Do not use firmware from this catagory. Latest Firmware This category includes the latest firmware for your Onefinity controller. Full SD Image Need to refresh or factory restore your machine controller? Reflash the OS onto the SD card from this catagory. Public Beta Tests Firmware listed here is for TESTING purposes. DO NOT USE this firmware if you are a production shop and your livelihood depends on it.
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
What is the Firmware update password?
The password to update will either be: onefinity OR: buildbotics Ensure you do not use capitals. If neither password works, you’ll need to reinstall the OS via this faq: Where to download the latest firmware: |
|
1 | 1343 | September 20, 2022 |
| About the Firmware (Buildbotics) category |
|
0 | 391 | September 20, 2022 |
| How do you set the time? |
|
3 | 220 | March 8, 2023 |
| Controller software rebooting |
|
2 | 30 | March 29, 2023 |
| Firmware 1.3.0 Alpha 1 |
|
11 | 636 | March 29, 2023 |
| Onefinity CNC Firmware 1.2.1 (2/8/23) (X-35/X-50 machines w/ Buildbotics Controller) (Most Recent) |
|
288 | 6654 | March 29, 2023 |
| 2.0.0 Alpha 2 BB Firmware (latest beta, 3/27/23) |
|
0 | 155 | March 27, 2023 |
| 2.0.0 Alpha 1 BB Firmware (latest beta, 2/18/23) |
|
36 | 1122 | March 27, 2023 |
|
How to reflash the operating system on the Onefinity (Full SD card image)
There are times when you may have a file go corrupt or (advanced) users start poking under the hood and may need to reflash the entire vanilla image to the sd card. This process is essentially reinstalling the Onefinity … |
|
0 | 7265 | May 21, 2021 |
| Experiencing a few issues with 1.2.1 |
|
30 | 1258 | March 10, 2023 |
| USB file transfer |
|
2 | 93 | March 7, 2023 |
| Firmware versions and WIFI connectivity |
|
5 | 335 | March 3, 2023 |
| User interface freezing |
|
0 | 88 | March 3, 2023 |
|
Firmware Update 1.0.9 (12/17/21) (Outdated Firmware)
1.0.9 is the sixth firmware update for the Onefinity CNC Controller. Download here: onefinity-1.0.9.tar.bz2 (2.2 MB) (sometimes, computers (esp macs) like to ‘unzip’ or decompress the file, ensure you are loading the … |
|
73 | 11486 | February 8, 2023 |
| Issues with new firmware 1.2.1 |
|
1 | 187 | March 3, 2023 |
| Improving Firmware experience using browser plugins |
|
0 | 185 | February 28, 2023 |
| Periodic Probing Failure Since Upgrade |
|
2 | 112 | February 26, 2023 |
| Firmware 1.2.1 back to firmware 1.0.9 |
|
2 | 226 | February 23, 2023 |
| Flashed SD card to 1.2.1 |
|
9 | 281 | February 23, 2023 |
| Stuck in jogging state after 1.2.1 upgrade |
|
5 | 142 | February 22, 2023 |
| 1.2.1 Issues and future upgrade to 2.0 |
|
4 | 363 | February 19, 2023 |
| 2.0 Alpha Test Build #0 (outdated) |
|
38 | 1211 | February 18, 2023 |
| Firmware update from original to 1.2.1, Will not load G-Code |
|
1 | 185 | February 17, 2023 |
| Resetting after a power outage |
|
9 | 177 | February 16, 2023 |
| My machine is showing the wrong axis dimensions for under/over |
|
3 | 111 | February 9, 2023 |
| Upgrading to 1.2.1 |
|
0 | 297 | February 8, 2023 |
| Firmware Update 1.0.8 (5/5/2021) (Outdated Firmware) |
|
92 | 9612 | February 8, 2023 |
| Firmware Update 1.0.7 (3/17/2021) (Outdated Firmware) |
|
66 | 5384 | February 8, 2023 |
| Firmware Update 1.0.7 BETA (3/11/2021) (Outdated Firmware) |
|
36 | 3465 | February 8, 2023 |
| Firmware Update 1.0.6 BETA (12/28/2020) (outdated firmware) |
|
44 | 5563 | February 8, 2023 |