Just a passing query, I have other solutions, but… Many of my most popular projects have to be removed and replaced on the CNC for additional tool paths that use bits not so good for using the probe 2 or 3 times before completely finished, sometimes days apart. My spoilboard system uses threaded i…

Hey John, you may be interesed in this :slight_smile:

I’ve found a inconsistencies with the stall homing, which are mainly generated when either axis being homed is already too close to its limit. It tends to push a little harder, if the distance to home is shorter, I’m making assumptions but I think it’s due to latency, and the startup torque/amperag…

I’ve taken to double checking both 'y ’ rails when I home the machine. Sometimes one rail will not flush up to the stop. When that happens I jog with my joystick all the way to the back and then “crash” it at high speed forwards…Bob’s your uncle. Then re-home. This has only happened occasionally but…

Thank you, everyone. Most helpful.

Is (stall) home consistent enough to use as a reference?

Uncategorized

349iq2345 October 4, 2022, 6:20pm 2

Hey John,

you may be interesed in this

Topic		Replies	Views
Stall Homing and the inability to work correctly when started at the opposite ends of the axis Stall Homing (BB Controller) (FAQ)	0	1535	March 7, 2022
Stall operation on 1F 50mm Foreman Original/PRO Series (Buildbotics) (Gen 1)	2	308	January 23, 2024
Help! Journeyman Homing issues Troubleshooting (X35/X50)	24	3317	February 26, 2022
Z Axis Homing Issue/ Limit Setting Issue (solved, adjust stall homing) Troubleshooting (X35/X50)	5	952	August 19, 2024
Home is not working correctly Uncategorized	3	1826	June 8, 2024

Is (stall) home consistent enough to use as a reference?

Related topics