Is this a missing part on my machine?

[3D-CNC (Michael Cartmell)]

Hello, when I unboxed my machine and got it setup I noticed that there was a piece that looks like is missing. Does anyone know if there is supposed to be something there like the other side? It is the x50 journeyman.

[3D-CNC (Michael Cartmell)]

Better picture with area shown.

[Pleased2fly (Jim Holler)]

No, there shouldn’t be anything there. The drive nut is on one side and the other side is empty.

[TMToronto]

Nothing is missing. Ball screw nut on one side, other side left open.

[OnefinityCNC (Onefinity Support)]

Nothing is missing:

X50 and X35 Ball Nut Gantry Block Position

New users to the X-50 rails may be alarmed about a ‘missing piece’ on the gantry block. Upon further review, you’ll notice that this is by design. Since we’ve given the option from the original 1610 ballscrew and the upgraded 1616 ballscrew, we’ve made it so that the X-50 gantry block is premachined for both. This allows us to cut down on the number of different pieces we need to have on hand. The 1610 attaches on one side, and the 1616 attaches on the other. See below for examples: X-50 1…