Lost alignment Y-axis!

[OnefinityCNC (Onefinity Support)]

How to realign the Y rails (x35/x50 machines)

If your machine is out of alignment in the Y rails (most notable when homing) as in one side is against the feet and the other is not like these pictures: [a][b] Here’s how to resolve: loosen all 8 bolts holding the X rail to the Y rails. reboot the controller skip homing move the Y rails to the front with the joypad as far as you can, so that both y gantrys hit the y feet and come to a resting point up against the feet (you may hear the motors grind during this process, this is normal and…