ok. this is only my 2nd carve on the machine and trying to use these first projects to learn what i can so doing things myself verse purchasing things. this particular issue is carving out a dustboot and having issues with the Z axis cutting to deep in the adaptive clearing path. in the fusion 360 …

@WaywardWoodworker @349iq2345 ok. so i went back and reset the tool paths and selected the bottom stop for each tool path. also changed the stock z height. [image] not sure which did it, but finally got success… those are the only 2 things i modified from the last cut. [20230410_134632] reall…

Zero at top. And once zeroed xyz i havent stopped or zeroed again. That’s why I’m so confused.

Hey Joshua, [image] RockingMallet: Zero at top. And your workpiece has exactly the height that the 3D model has?

Yep. Just checked that this morning. Im starting to wonder if i screwed up the z height on the masso when i adjusted to my probe. Going to check that

Hey Joshua, you said you “believe” you probed Z correctly. How exactly did you probe Z?

Probe on corner get xy Lift z over probe. Probe z. Probe doesnt move. From this it looks dead on. [Image_20230409_1525287270971044428818736] [Image_20230409_1525491434837487779462434]

Hey Joshua, which touch probe are you using? I cannot see it in your images. What kind of bit is that? Is this the bit you use for milling this?

Its the probe from onefinity. Purchased with journeyman. Bit is 1/4 upcut 3in long.

Hey Joshua, is there a special reason why you probe Z separately? EDIT, ah i forgot. We’re on the Masso, not on the Onefinity.

Need help with Z cutting too deep (Solved)

Elite Series (Masso & Redline) (Gen 1)

349iq2345 April 9, 2023, 8:07pm 2

Hey Joshua,

do you have the workpiece zero on the top or on the bottom of the workpiece?

Do you reprobe Z somewhen, after initial XYZ probing?

Topic		Replies	Views
After changing bits and probing Z, the Z is way off?	23	2890	February 17, 2022
Z Axis off after new tool/file/probe with Fusion 360 Troubleshooting (X35/X50)	8	660	May 2, 2023
Z zero off around 1/32 after probe	3	429	April 28, 2022
Z axis cutting above my material	20	1111	September 30, 2024
Z axis not getting low enough to cut Original/PRO Series (Buildbotics) (Gen 1)	3	656	December 7, 2022

Need help with Z cutting too deep (Solved)

Related topics