No Rail Mounting Screws - Need Size

[rtucker2 (Tyson Tucker)]

Need some help. My Journeyman was delivered yesterday, but it did not come with screws to attach the X Rail to the Y rails, and to mount on the Z axis to the X.

Can someone share what size and length these are?

[OnefinityCNC (Onefinity Support)]

We can send some if you don’t want to get them locally!

Common Bolt Types on the Onefinity

X Rail 8 Bolts holding down the X Rail to Y gantry blocks : m6 x 22mm long Y Rail to QCW 16 bolts holding the Y feet to the QCW blocks: m6 x 22mm long Stiffy 2 M5-0.8 x 16mm (ends) 2 M6-1.0 x 14mm (gantry) 2 M6x6 7380-10.9 (short) Z Slider Z-16 4 bolts holding the z slider to X gantry: m5 low head x 12mm long 2 bolts squeezing the mount together : M5 x 30mm Z Slider Z-20 4 bolts holding the z slider to X gantry: M5 socket head x 20 Tramming Bolts m5 low head x 12mm long (same bolts…

[rtucker2 (Tyson Tucker)]

Thanks! I called this morning and they are sending, but looking at the tracking they aren’t arriving until next week and I would really like to get it together this weekend.