First the specifics of my controller, software and machine: I am using a Redline Controller on a Onefinity Journeyman with a 2.2kw 80mm spindle (220v), using CarveCoMakerPlus, and have had no issues with manually creating items, although the start point there may also be slightly off, I was using ov…

My first thought is when your tool change is done do you call up your work location again before it does it work. So when doing tool changes it basically change your work location so in your program you should make sure you call out your “G code” work zero. Like G54 or what ever you are using as you…

Thanks Joe, I appreciate the time you took to provide the details. It does have the G54 zero at the beginning, but I am not sure about before the tool change. Today I eliminated the tool setter and just used the probe. It still starts bottom left of the corner. I have the corner as the starting plac…

I believe that another post solved the issue in the setup of the tool setter setting Maybe you have a similar issue [image] Z Issues while loading project twoGen 2 Elite Series I just got my new machine up and running, and unfortunately I’m encountering an iss…

Thanks Ken, that isn’t it but I appreciate you sharing. I am reading through the other suggestions given to him and maybe one of those is the omitted step (no doubt all it is)! Jim

My issue was that the 3D rendering was not showing correctly after loading a file. The part of the tool setter setup I accidentally skipped giving me the issues was the z calculation (the one without the bit installed). Once I did that step everything worked. If you watched the video I doubt you ski…

Project starting in wrong place after Tool setter and probe setup

Elite Series (Masso & Redline) (Gen 1)

Ken5 August 2, 2026, 9:24pm 4

I believe that another post solved the issue in the setup of the tool setter setting
Maybe you have a similar issue

Topic		Replies	Views
Using the Toolsetter with Redline Controller \| Proper Order of Opperations \| Quickstart Guide Elite Series Gen 2 Official FAQs	0	689	March 20, 2026
Setting Z after manual tool change Elite Series (Masso & Redline) (Gen 1)	14	1548	November 30, 2023
Redline Controller and Eazy-Z Tool Setter Elite Series (Masso & Redline) (Gen 1)	5	322	December 27, 2025
Tool changes And Z Height Original/PRO Series (Buildbotics) (Gen 1)	62	9827	April 27, 2025
Proper setup for ATC toolpaths starting with manual tool? Onefinity Easy ATC (Automatic Tool Changer)	9	262	July 29, 2025

Project starting in wrong place after Tool setter and probe setup

Related topics