Reversing Y axes on Onefinity X-35/X-50 (stepper motors to the front of the machine)

Machines (Original/PRO) Troubleshooting (X35/X50)
1

Brand new to this, I am totally lost. I mounted the Y rails backwards so the connectors were safer in the back of the machine. The assembly tutorial said that was ok. I assume because of that the machine wants to home to the back left and the controller acts opposite direction too. How do i get it to home to the front left?
TIA

2

You need to reverse the y 1 and y 2 in the software on the motors tab.

2 Likes
3

Hey Nick,

Onefinity_CNC__Reverse_Motor_Y__How to Flip The Y Rails Backwards cable in back of machine
Onefinity_CNC__Reverse_Motor_Y__How to Flip The Y Rails Backwards cable in back of machine1141×1055 102 KB

Note: This would work for Motor 0 (X axis) too, if you want to have the stepper motor to the left (and cable output on the right) on X axis.

3 Likes
4

thanks that worked and im glad you added the save part too i would have missed that.

1 Like