She's ready to go!

[Aiph5u (Aiph5u (not affiliated with Onefinity))]

Hey John,

I have no experience with the that vfd and its plastic housing and wiring, but a VFD is a device intended to be mounted in an earthed control cabinet. On the door of such a cabinet, you usually have a power switch, an emergency stop switch, and a reset świtch which requires to be pressed to restart after the release of the emergency switch. Here you can see all three from the back in the VFD cabinet’s door:

@Aiph5u

• Electrical Cabinets - Mechatron

Unboxing video:

CNC Finale: Automatic Toolchanger Spindle Install & Testing – Youtube

Image: Shown is a full-blown control cabinet with VFD, circuit breaker, safety relay (red), and EMI filter on the left, and the pneumatics system for the automatic tool changer system of the ATC-8022-42-HSK25 2.2 kW 42,000 rpm water-cooled spindle on the right (and additional air tube (blue) with valve retrofit by video author which also wanted workpiece mist coolant – described in the video). On the back of the door you see the back of power switch, emergency button and reset button. Note the thick earth line that connects door to the rest of the cabinet.

@Aiph5u

Image: The VFD’s power button, Reset button, and Emergency Stop button on the VFD control cabinet’s door.

See also

• Build your own VFD cabinet