There seems to be plenty of interest in vertical clamping of stock for end grain joinery. Certainly, the brain trust of this forum has a lot of creativity - please post pics of YOUR table mods for the vertical clamping of boards. Thanks!

Hey Mike, [image] mchoonmaker: I intended this thread to (hopefully) be a one-stop shop for vertical clamping ideas. I’d guess there may be several more designs that have not been posted yet, and this could provide a landing pad for those additional designs… in this forum there has always be…

I made a fixture that can mount under your table. [IMG_0955] [IMG_6441] [IMG_0966] It has holes placed to mount to a QCW frame but it is not necessary to have one, you could easily mount it to the underside of your table in any pattern you like. Use your CNC to cut through your waste-board and …

I made this table so i could use vertical clamping when i wanted to especially for dovetails and box joints and even loose tenons. I would be happy to answer any questions you may have. [IMG_20220718_154454831] [IMG_20220713_105639212] [IMG_20220723_203758779 (1)] I hope this helps someone. I …

ok more pictures of table with vertical holding. actually holding something. perfectly square to the (still in the future any day now) onefinity journeyman. [IMG_20220811_163200050]

[IMG_20220811_163429074] and here it is with it’s trap door in place now all I need to do is get the JM in and set up everything else . spoil board. keyways drag chains…etc.etc.etc.

This is great. I was considering something parallel to the front of the table. It never even occurred to me to have it parallel to the t-tracks! And it’s a lot better for space saving underneath. Thanks!

you are very welcome. enjoy your work

Late to the party - don’t even have my machine yet, but I plan on doing something similar to @Dakotah above by making use of the spacing on the QCW frame w/ legs. I came across some optical breadboard and precise angle brackets by Base Lab Tools ( https://www.baselabtools.com/Standard_c_289.html ). Th…

I’m a little confused…. I see the picture and understand the concept and think it is a great idea. I look at the link and it gives me a bunch of items which I assume is aluminum for the vertical work hold but do not know the size needed I also looked for the STUDIO TOIYABE wasteboard layout and c…

Show us your vertical clamping methods!

Gallery Machine Setups

HardtailSr (robert mainville) October 11, 2022, 11:49pm 13

Here is a sketch of the acme modified moxon vice setup I hope it explains things better.

Topic		Replies	Views
Box Joints and Dovetails Original/PRO Series (Buildbotics) (Gen 1)	64	10071	December 21, 2022
Vertical table for joinery	12	3783	February 11, 2023
My table with vertical holding Machine Setups	30	5042	January 15, 2023
It's ALIVE! Run for your lives! Ahhhh! Machine Setups	20	2587	August 1, 2022
Anyone using joint cam software? CAD (General)	29	3747	February 25, 2023

Show us your vertical clamping methods!

Related topics