I have gotten the machine actually working using the eathernet connecting through onefinity.local. It’s a short term solution, but it shows me that my machine works. I think the next question is how to get the controller connected so that I can move the machine around.

Hey Eric, [image] Arykk: I think the next question is how to get the controller connected so that I can move the machine around. …or do you mean the gamepad or joypad or joystick? [Joypad vs Controller] Official Onefinity Joystick Controls (How to changes modes)

Sorry, having grown up calling a Joypad a Controller, I will have to break myself from that habit.

I have found that these days I must be told things. Trying to do things as I “read” (wildly difficult) is a waste of time most of the time.

Hey Eric, [image] Arykk: Trying to do things as I “read” (wildly difficult) is a waste of time most of the time. Do you have difficulties to read? I don’t do things while I read either. I first read the manual, then I begin with doing. Of course I haven’t remembered everything, but having …

Yes, with my brain injury I have learned that when I read I tend to skip lines, and I end up having to go back and reread everything multiple times. So I have learned that the best way to achieve success is to talk to someone while I do it, which is not likely, but next would be videos. I am going …

Hey Eric, [image] Arykk: Yes, with my brain injury I have learned that when I read I tend to skip lines, and I end up having to go back and reread everything multiple times. So I have learned that the best way to achieve success is to talk to someone while I do it, which is not likely, but next…

I am finding that the videos are not helping get me to the finish line, because they are all made from to outlook that they purchased the machine and are assembling with all the pieces provided. I think I received the bones and that’s about it. Sorry, let me restate that. I received all but the joys…

So I got on the forum from my phone and grabbed a picture on it. So I snapped a picture of the wasteboard that I got done today. I think I’m just about ready to get started, so now I just need the next step. My XCarve uses Easel, but I really don’t like it, so I’d prefer to use something else. [im…

Hey Eric, [image] Arykk: I am finding that the videos are not helping get me to the finish line, because they are all made from to outlook that they purchased the machine and are assembling with all the pieces provided. I think I received the bones and that’s about it. Sorry, let me restate tha…

Silly Question About Controller

Original/PRO Series (Buildbotics) (Gen 1) Controller (Buildbotics) Discussion

349iq2345 January 9, 2023, 7:52am 15

Hey Eric,

Just in case you feel some part could be missing, here is the

Packing List For The Onefinity Woodworker (PDF)

Topic		Replies	Views
Help! (hand holding) Grand Juntion, CO	3	556	January 3, 2023
Toolpath Warning: Over/Under (BB Buildbotics), Soft Alarm (Masso), Or Toolpath Warning Exceeded (Redline) Over / Under / Soft Alarm/Toolpath Exceeded	0	19172	December 8, 2020
Joystick Controller Accessories	92	13824	April 16, 2023
New to Onefinity and not happy- things don't work (solved, didn’t put in the battery’s in the correct orientation) Controller (Buildbotics) Discussion	7	1116	November 21, 2022
Like many new forums, the excitement and Original/PRO Series (Buildbotics) (Gen 1)	52	5559	November 30, 2023

Silly Question About Controller

Related topics