Has anyone done as the manual speaks about and built a 4’x5’ basic flat table with controller mounted next to the unit [image] I am finally starting my table design and build. Does this lay out work be for I go overboard and add the many options I have seen and heard. So do you have the basic table…

@Squared Erik could I ask how you are securing the insert to the rest of the table? I would love to see your finished setup. I really like your design. :grin:

Hey John, [image] Corners: What is the prime reason for an enclosure? Noise or dust I think with an enclosure you may well reduce dust and noise in the room where you operate the machine, but you will not completely get rid of it. I am thinking about it since I ask myself what I can leave i…

For those of you who constructed tables from wood and have either sheets or a torsion box on top to which the 1F is attached, how did you attach the top to the underlying structure? Specifically, I am concerned about wooden legs/stretchers and wood movement warping the surface to which the 1F is fa…

I screwed my top directly into the 2x6’s that are supporting the top. I also laminated a 2nd sheet of MDF for the top - so I have 2 sheets glued together for my top. Just re-surfaced after 6 months of it sitting there, and the entire table was within .001 of flat on the resurface. I might be more c…

Got the frame of my table complete, simple 2x4 and 4x4 construction. 60" W x 49" D. I’m hopefully receiving my machine in the next week or so (#16718). I’m planning on going with 3/4" MDF for the top, then another sheet inside my enclosure, and then there will be the spoilboard. You guys think the s…

For my modified Fisher portable, I assembled a torsion box with the internal structural matrix glued and screwed (Titebond III & 1 1/4” pocket screws) to a 3/4”x48”x47” sheet of maple plywood. Clamping of the matrix internal cross members was accomplished by cantilevered plywood beams, center blocks…

love the setup. My new table will be a torsion box like yours, need a new table as I have a woodworker and now upgrading to the journeymen.

Has anyone done a Fisher Table with an enclosure over the 1F? I like the flip style table for storing the 1F vertically and the added work surface but will need an enclosure for noise and dust. My new shop will be smaller and it would be really helpful to do this. I’m playing around with some drawi…

The Table basic

Original/PRO Series (Buildbotics) (Gen 1)

PaquetteWoodworks (Ryan Paquette) August 4, 2021, 1:11am 116

Topic		Replies	Views
CNC platform / table / enclosure Accessories	122	17112	November 3, 2022
Table Improvements	25	2192	November 23, 2023
Cnc Table Hindsight 20/20 Gallery	72	9222	October 14, 2023
Elite Table Builds Elite Series (Masso & Redline) (Gen 1)	203	24729	December 26, 2025
Thoughts on my table design? Machine Setups	24	3421	October 10, 2022

The Table basic

Related topics