Hi, My Woodworker X50 is on order and unlikely to be with me before 2022, but I want to try and prepare the workspace for it’s arrival. I don’t have a lot of space, so am in the process of designing a hinged board on wheels or casters so that it takes up less space when not in use, and can be whee…

Hi Peter - 1 - the dimensions of the woodworker should be: 45.375 x 44.473 outside dimensions with motors; 44.049x42.347 without the motors (I can’t validate but that’s what I have in my CAD drawing). There is a CAD model floating around on the forums as well. 2 - You can use any screw you want - …

Thanks, Tom. I’ll search a bit harder :innocent: :rofl:

I will see if I can find the threads aS well. Here’s a picture of the outline which might be easier to understand: [Screen Shot 2021-11-16 at 10.08.01 AM]

Hey Peter, the “Bookmarks” feature of this forum is nice. I have all these things quickly at hand under “Dimensions”: [image] Nightowl: What are the exact footprint dimensions, i.e. without the “stick out” of the stepper motor? I’m thinking about manufacturing a frame to sit the machine in, ra…

Hey Tom, [image] cyberreefguru: There is a CAD model floating around on the forums as well. Do you mean this one: Onefinity Woodworker by Andrew Brown.stp by @AndrewBrown ?

Yes, I believe so. I thought I saw a fusion model at one point too. I’m on a different computer right now so I can’t validate. -Tom

Something to check before you start running files. If you set your machine on rails instead of a flat surface you can run into trouble with the Suck It dust boot hitting the mounting feet in a shallow cut.

Yes you can - especially on the right side. Don’t ask how I know…

Thanks for your responses, but could I just bump this part of my question above, please: [image] Nightowl: …does anyone know what the name and type of the connectors used to plug the probe into the control box, please? Also, I was asking about the supplied screws (if any!) to secure the cast…

Hey Peter, [image] Size for Machinist table [image] Size for Machinist table Thank you. It looks like there is also an expanded area at the top of the bolt holes. Is the through hole diameter 8mm, and room for a washer on top? if yes, would you know the diameter of this top circular area? J…

Types of baseboard and other questions

Original/PRO Series (Buildbotics) (Gen 1)

349iq2345 November 21, 2021, 1:56am 12

These pictures show these even better:

Topic		Replies	Views
Machine Dimensions Original/PRO Series (Buildbotics) (Gen 1)	44	19798	May 6, 2022
Onefinity foot bolt size / table / anti-torsion box	3	253	October 22, 2024
Mounting on table Original/PRO Series (Buildbotics) (Gen 1)	16	2755	December 20, 2020
It's ALIVE! Run for your lives! Ahhhh! Machine Setups	20	2676	August 1, 2022
Onefinity Info - Installation and Operation Instructions - Woodworker Original/PRO Series (Buildbotics) (Gen 1)	7	5141	January 22, 2022

Types of baseboard and other questions

Related topics