Cannot home z Axis

[OnefinityCNC (Onefinity Support)]

Sound’s like you’ve changed motor settings.

Upgrade to 1.0.9 firmware, then reset the configuration to your specific machine model.

Firmware Update 1.0.9 (12/17/21) (Outdated Firmware)

1.0.9 is the sixth firmware update for the Onefinity CNC Controller. Download here: onefinity-1.0.9.tar.bz2 (2.2 MB) (sometimes, computers (esp macs) like to ‘unzip’ or decompress the file, ensure you are loading the full zipped file ending in .bz2) How To Install: Updating via USB You’ll do an update via USB using the following steps: Copy the blue .bz2 file below onto a usb stick (it must be formatted as fat 32 or ntsf). Click the flyout menu (three bars on top left), general, under fir…

Firmware Update 1.0.9 (12/17/21) (Latest Release) - Firmware Updates - Onefinity CNC Forum

1.0.9 is the sixth firmware update for the Onefinity CNC Controller. Download here: onefinity-1.0.9.tar.bz2 (2.2 MB) (sometimes, computers (esp macs) like to ‘unzip’ or decompress the file, ensure you are loading the full zipped file ending in .bz2) How To Install: Updating via USB You’ll do an update via USB using the following steps: Copy the blue .bz2 file below onto a usb stick (it …

http://forum.onefinitycnc.com

How To Reset The Configuration To Defaults (BB Controller)

Occasionally, there may be a time when you need to reset the machine back to factory defaults. Here’s how to perform a configuration reset. Please note, resetting the configuration will change any custom values you have entered (i.e. probe size, stall homing settings). Please make note of these BEFORE resetting so you can input them back in once reset. Always ensure you’re on the latest firmware (as some of these options are not available in older firmware) first by checking here: Latest Fir…