I live in the Utah mountains and was hoping to only heat my shop when I’m working out there, do you guys think it would be hard on the controller and touch screen to let them get super cold and then turn the heat on on the weekends

[image] Recommended Temperature for the Onefinity CNC Controller (Buildbotics) FAQ We do NOT suggest letting the screen or controller being in temperatures below 40F. Condensation (and high humidity) can build inside and damage the electronics. This is especially bad for…

I just moved from SW Michigan to Phoenix, so that will no longer be an issue for me. But in MI, I used to run my heater to maintain a shop temp of around 55 deg. to reduce the humidity issue. The issue with high humidity climates is that condensation forms first on non-absorbent surfaces like clean …

Machinist, I live in the Phoenix area and cold will not be your challenge. I have a mini-split in my garage/workshop to keep the temps manageable in the hotter months.

Ken, I’m just about to (hopefully) start building my workshop area that will be 8’ x 12’. I was going to look at the mini-split units but didn’t know if those would be overkill for that small of an area. Main challenge is just initially getting it built. I pretty much gave up on any contractors doin…

I haven’t received my Onefinity yet but am wondering if disconnecting the controller and display will cause you to lose any settings?

No, it will not. It will remember them.

Last winter I just unhooked my controller and screen and brought them inside when I wasn’t using it. It was the easiest solution for me back then. Will probably just do the same this year until I get some type of heating in my shop.

Thats what I assumed but better to check. Thanks

Construction is definitely a challenge in the valley. Good luck with the build.

Thanks @Ken , I’m just about to order the materials & do it myself. Hopefully will be getting a price from someone today that came out & looked at the project.

Cold weather coming

Original/PRO Series (Buildbotics) (Gen 1) Controller (Buildbotics) Discussion

Craig (Craig) August 16, 2021, 12:23am 2

Topic		Replies	Views
What temperatures can the Onefinity stand Original/PRO Series (Buildbotics) (Gen 1)	6	1237	December 2, 2020
The weather is getting colder! Be mindful of the affects of it on your Onefinity! Uncategorized	19	2717	December 24, 2022
Cold Weather, first winter Uncategorized	10	1414	December 12, 2021
Recommended Temperature for the Onefinity CNC Maintenance	0	3610	November 26, 2020
Use in unheated shop Elite Series (Masso & Redline) (Gen 1)	6	775	March 17, 2023

Cold weather coming

Related topics