Good day, Everyone. Just got my machine, been experimenting. I noticed that when I stop the job using the stop button, I can no longer move the machine axys using the button. As the matter of fact, I can’t control any of the axys at all with neither homing, nor the directional buttons. I have to p…

Solution: fixed in firmware 1.0.9

Man. for god’s sake is an official fix coming or not? @OnefinityCNC Just today I was running a job and figured, “eh, I might need to adjust the axys by a few millimeters” in the middle of the job. But no, as soon as I stop, low and behold - disconnected and all my coordinates are lost. Is this reall…

I agree with you this is getting old very quick. It just happened to me as well and I am running v1.0.8. In the half dozen times that this has happened to me it has been after a job completed and the router returned to the work zero. One thing that I found is that I can recover without losing posit…

So is @OnefinityCNC gonna be doing the whole silent treatment here? No ETA, not even a comment on the status?

It’ll be fixed in the next update.

Which will be released when? :slight_smile:

:frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: :frowning: woulda left just 1 :frowning: but it’s a 20 character minimum.

Bumping this. Just got a disconnect after pausing the job and trying to resume a couple of hours later. It would be a nice feature if this worked reliably.

Another month passes, the trees turn of amber hue

:joy: and :frowning_face: (so many leaves to clean up…)

"Disconnected" Pop up after stopping the job. Only way to regain control is e-stop?

Original/PRO Series (Buildbotics) (Gen 1) Troubleshooting (X35/X50)

OnefinityCNC (Onefinity CNC Official ✅) September 6, 2021, 11:13pm 77

No ETA at this time.

Stopping mid carve

Topic		Replies	Views
CNC lock after clicking stop button Troubleshooting (X35/X50)	8	1718	February 10, 2022
V1.3 Hit STOP in web interface, can't load a new file, I lose zero Troubleshooting (X35/X50)	14	862	December 17, 2023
After job completed not able to move the x,y or z with Joy stick or Keyboard	5	719	December 6, 2022
Firmware Update 1.0.9 (12/17/21) (Outdated Firmware) Outdated Firmware	73	15892	February 8, 2023
Stopping mid carve	1	721	October 20, 2021

"Disconnected" Pop up after stopping the job. Only way to regain control is e-stop?

Related topics