DIY chip deflector for Y axis rails

[AndyP (Badger)]

I like it. I use the same solution and it has worked well for a while now.

Local Practices and Things to Share

Here’s another hack I found effective for keeping most of the dust and chips off the threads on the Y rails. I always had a fancy for putting guards along inside the length Y rails like I see on some machines. However I couldn’t work out how to attach the 6 mm plywood (my material to hand) without issue and I didn’t have a length long enough but I did have a 10inch strip in my scrap bin. So I attached that to the Xrail block using blue tape and CA glue and it works a treat, be…