Looking to learn from others as I design my table. I ordered the Foreman so the footprint of the machine is 64"x62.6". Requirements: Must contain the entire dimensions of the machine within the table footprint. Must be on a mobile base. Must have a removable section for vertical carve capabiliti…

I have the Woodworker with a 49" x 48" table, the top is 2 pieces of 3/4 MDF laminated together with glue and screws then a 3/4" MDF spoil board on top of that. I built the frame extra heavy duty using all M/T joints at all junctions. I have mine on HD casters but considering removing them., I thoug…

Any chance you can send a picture of your setup ?Just want to see how the spoilboard is situated.

My woodworker table build which is 60" square, 3/4 OSB top: [image] Looking for workbench design feedback Machine Setups I built my 5’ square table with a 6" split down the middle for (eventually) clamping vertical stock which allows me to use the entire Y-axis travel limi…

Sure, see attached [image] [image] [image] [image] [image]

Hey Poppa, [image] PoppaChris: If someone that has the woodworker could let me know their dream table dimensions, I would really appreciate it. the forum is really full of tables, and Woodworker (32"x32") and Machinist (16"x16") were the only models for a long time this forum existed. Howev…

Hey Poppa, [image] PoppaChris: Just want to see how the spoilboard is situated. You might be interested to see this: Cutting area location Spoilboard placement [image] Suckit dust shoe Bristles causing blockage See also: Additionally, the following can be of help: Dust boot overhang C…

Hey Poppa, [image] PoppaChris: One other question I have is about the table + the QCW frame. Some people use it and some people don’t. Is it better to mount the machine directly to the table or mount it to the qcw frame which appears to sit on the table vs mount to the table. Any help on that t…

@Bboozier - Nice job. Would you mind sharing the dimensions/placement for the interior braces and plywood cuts? This is a fabulous idea to not waste material and save money. Great work.

@Keith_PDX - Sure thing Keith. Here’s the cut layout for a 4x8 sheet and the drawing for the steel table. CNC_Table_Drawing.pdf (604.5 KB) [CNC_TABLE_TOP_SheetLayout]

Thinking of doing a flip top. Does it have enough rigidity? Assume you have legs at 4 corners? Does it shake/wobble when in use? Thanks

Elite Table Builds

Elite Series (Masso & Redline) (Gen 1)

349iq2345 October 10, 2023, 9:32pm 101

Hey Poppa,

Topic		Replies	Views
The Table basic Original/PRO Series (Buildbotics) (Gen 1)	145	25501	April 9, 2025
Thoughts on my table design? Machine Setups	24	3444	October 10, 2022
Flip up CNC table Gallery	42	10723	May 11, 2021
CNC platform / table / enclosure Accessories	122	17363	November 3, 2022
Journeyman Table	32	4452	May 24, 2024

Elite Table Builds

Related topics