I bought the Ultimate Elite Package on the Black Friday sale in November 2024 (order #52003, $4,360 all in), assembled it on the rolling stand, powered it up, and tested the spindle. That’s as far as it got. My shop time ended up going to the lasers and UV printer, so this machine has never made a cut and I’d rather it go to someone who will use it.
What’s included:
- Onefinity Elite Woodworker, 32" x 32", Masso G3 Touch controller (Gen 3) with the 15" screen, closed loop steppers, Z-20 slider. Firmware as shipped, v5.07
- Onefinity Redline 80mm 1.5kW air cooled spindle kit, mounted and tested, VFD panel mounted at the controller, spare fuses
- Onefinity Easy ATC (RapidChange) with 4 tool holders and collets, desktop mount. Box opened to check contents, never installed
- Eazy-Z tool setter and touch probe
- QCW frame, undermount, on the Onefinity rolling folding stand
- Pro Suction dust boot with a printed adapter for a 2-1/2" vac hose
- RowdyRoman hose boom and rail wipers, included, not yet installed
- Vevor plastic enclosure kit for dust containment
- Tooling: Whiteside 1540 and 1500 V-bits, Whiteside 6210 surfacing bit, 1/4" spiral upcut and downcut, micro-jig bit, 5-piece keyhole bit set, engraving bit set, two ER20 collet sets, Redline wrenches, two dust boot brushes, clamps
- All original boxes and packaging
Condition is new aside from assembly and the power-on test.
Asking $3,900 for the complete setup. A Fein Turbo I dust extractor with the reusable filter bag, hose, and the printed adapter already fitted is available with the machine for an additional $200.
Pickup only, in Waupaca, Wisconsin, about 45 minutes from Appleton. The machine comes as it sits, assembled on the stand. Plan on bringing two people and a vehicle that can take it; I can point and advise but won’t be doing the lifting. All the original boxes are here and go with it.
For anyone weighing this against a new Gen 2: this is the Gen 1 Elite with the Masso G3 Touch, which is an industrial controller used well beyond Onefinity, with years of community knowledge behind it and no PC or tether required. If you’d rather have proven than new, this is the package to get, and it’s priced for it. Message me here with questions or to set up a time to see it run.
Michael
