Jenny 1/4 and 1/8 speeds and feeds from Cody's recommend chart

1

192713112_525024521869375_2225447832011494969_n
192713112_525024521869375_2225447832011494969_n592×746 41.6 KB

196370818_322312449570183_56161799390008378_n
196370818_322312449570183_56161799390008378_n960×720 102 KB

194577969_300436448427270_4946467181039376778_n
194577969_300436448427270_4946467181039376778_n960×720 95.5 KB

Cody sent me these feed and speeds charts for the jenny bits and the 1f so I wanted to pass these along.

2 Likes
2

Thanks for the information. Looks like an awesome spreadsheet. Where can we get a copy?

Thanks

3

They are on the Cadence web site

Feeds and Speeds | Cadence MFG (cadencemfgdesign.com)

2 Likes
4

These are the only 2 he sent me and not the full spreadsheet. The ones on the website are different from the ones I posted which are specific for the 1F.

5

Which ones are specific to the Onefinity - the ones on his website, or the ones you posted?

6

The one I posted above is 1F.

7

That’s very useful information, thanks for sharing!

8

Thanks for posting that data. I have been trying to manually put those figures into my Tool Database. Im still just starting out with the machine and the software.
Finding it confusing and tedious entering figures for ply, soft, and hard woods for each bit. (12 entries per bit?)
I cant seem to match the figures provided in his spreadsheet with the requirements of the Vetric forms. What is Ramp Plunge vs Plunge? Ex. Ramp plunge 90 Plunge33. I havent figured out which one to enter where on the tool data form and its making me a little crazy.
Is step down the same thing as pass depth?
Yes its late and im tired. But thanks to anyone who might be able help me out of this confusion (OCD Obsession.)

1 Like