The Masso MPG pendant is great. Way better having tactile feedback when you’re doing machine positioning. What’s not great is that the DB15 Port into the Masso controller leaves no room to plug in directly. Somewhere here or another forum I saw that you can pick up these cheap DB15 ribbon cables th…

Nice work. I’m running a MASSO on small mill and always found their solution of just removing the hard case from the end of the plug and letting the wiring harness just flex to make up for the lack of space, wanting. I’ll probably go revisit that and steal your idea. Thanks.

Nice, we should get together.. I made this [mpg7]

Lcom makes a right angle adapter for this purpose. itis a thread on this forum. very neat look and functions perfectly. i will look it up and post the link. in a few minutes

re it is Deluxe Molded D-Sub Cable, DB15 Male / Right Angle Exit 2 Male, 2.5 ft - CSMNRA15-2MM-2.5 hope this helps i used it and it works great.

You can also replace the hard case for the connector. [image] Installation pics of MASSO Pendant robotElite Series (Masso & Redline) (Gen 1) I just 3D printed a simple wire cover and called it done. I’m including the STL file here for anyone who wants it. […

I saw a bunch of the solutions previously and they did solve the right angle issue with the MPG clearance but still required you to open the enclosure to plug in, or had a loose connector go through the back. I prefer the clean look and don’t have to open my enclosure to install the pendant. Easy to…

I have an enclosure so also have the Masso on an articulating monitor arm. Like you, I have the cables wrapped to keep them tidy. :slight_smile: The pendant is mounted on the right side of the Masso. [IMG_5145]

awsome, thats thinking inside the box

Nice enclosure, I’m too cheap to use extrusion as a frame so I opted for plywood instead. Still WIP [image1(1)] [image0(2)] Monitor arm lets me swing the Masso out of the way when I’m not milling anything

Here’s the STL if you’re interested. It’s a 2 piece design, uses 2 M4-16 bolts. Bolts will cut threads into the bottom piece when installing. The bottom piece goes first and the top cover swings into place. One thing to note is you need to bond the screw terminals on the Masso to the MPG port so yo…

MPG port adapter for Masso

Accessories

TommyObar (TObar) January 5, 2026, 5:20pm 6

You can also replace the hard case for the connector.

Topic		Replies	Views
Installation pics of MASSO Pendant Elite Series (Masso & Redline) (Gen 1)	18	1580	May 9, 2025
Solution to the masso pendant connection debacle	5	203	May 6, 2025
Masso Elite MPG Right Angles Connector Elite Series (Masso & Redline) (Gen 1)	8	265	January 18, 2025
How to wire a NONE Masso MPG Elite Series (Masso & Redline) (Gen 1)	23	1633	January 21, 2024
Masso pendant options Elite Series (Masso & Redline) (Gen 1)	9	5251	August 23, 2024

MPG port adapter for Masso

Related topics