Yes, I know 4x4 is overkill, but I had a bunch of this left over from my outdoor kitchen build so why not? as you can see in the center (sort of), are two acme 5/8 x8 screws for my moxon type vice for vertical holding as i plan to do lots of drawers both dovetails and finger joints. The vice will be…

i said before i am making progress every day but today it feels like i am in a olding pattern one tiny part is preventing me from going forward on the vice or to be more technical my vertical holding device lol. 10 mm double split ring clamp. well it should be here wednesday so two more days. did my…

Here are a few more pics of the new vice and 90 degree holding /backer board I’d be happy to answer any questions you may have. and yes, this is square to the top and will be square to the machine (journeyman) when I install it. it is also dead level you can see in one of these pics the fence on th…

Hey Robert, this looks very nice. The dust groove is a plus. Would you share the source for the screws and the handles and how you modified them? I have another question: On the frame, did you do mortise and tenon joints there, or are the 4x4s just cutting edge to side, and bolted through? I mea…

ok feet first they are bolted through top and bottom with 6 inch Timber lock style screws I only did half lap joints on the top corners the rest were timber lock screws, two, so they wont twist. (yes I got lazy) but the whole thing is very square flush and level. I got the handles on amazon Handwh…

You are right about the Money. My Journeyman was $5000 as ordered with the over/ under and all accessories. I then have added dust collection system, more bits, table components, router and a whole bunch of miscellaneous stuff. Probably got $7000 invested and haven’t cut my first project yet. Based …

Any new pictures? Im thinking about a verticle wasteboard setup for the Foreman and would like to hear if you have finished and if theres changes youd recommend.

no new pics yet but I would not change anything.

you know i never realized that i have not posted pictures of the completed table thanks for the reminder. I will be posting those pics and some projects today as well.

My table with vertical holding

Gallery Machine Setups

PezWoodworks (Pat) January 3, 2023, 1:55pm 30

Pretty hard to beat the Pantorouter for M&T and box joints, very fast and accurate

Vertical table for joinery

Topic		Replies	Views
Vertical table for joinery	12	3780	February 11, 2023
Show us your vertical clamping methods! Machine Setups	76	12793	March 13, 2026
Looking for workbench design feedback Machine Setups	23	2693	June 23, 2022
Thinking outside the box (table) Gallery	35	3357	November 28, 2022
Thoughts on my table design? Machine Setups	24	3418	October 10, 2022

My table with vertical holding

Related topics