I am looking for a solution. While probing for xyz, the bit touches the side of the probe and pushes it over until I get the message “switch not found”. [1613482434521182663612717989459]

I just hold it from moving. If it moves even a tiny bit it will give a false reading.

I tried holding it down, but it still pushes it over. I brought the probe fast seek down to 50

Sounds like you have a broken connection in the probe wire. I don’t remember where, but there is a screen in the flyout menu that will indicate a green check box if the probe is making contact. You can pick up the touch probe and touch it against the bit lightly to see if that checkbox turns green …

If you remember where it is that would be appreciated. I looked through, but can’t find it.

It does it on the control. The probe keys turn green when in contact.

I believe it was just a dirty bit…

Has the probe function been working now? Yeah, a dirty bit or collet on the router can cause this too.

Yeah, I scraped the bit with a razor blade and it worked. The Green light tip sent me on the right direction, Thanks!

I’m having a slightly different problem. I got an error message that says “switch found “ when I probe for Z. Then the controller and pretty much everything else stops working. I see there is a software update pop up that I will try installing.

[image] "Estopped, Switch not found" - What does this mean? Troubleshooting What does ‘Estopped, Switch not found’ mean? [1] 99% of the time, when users see this ‘warning’, it means that the program/gcode they are running includes an m6 (probe) command line in the code.…

Probe. Switch not found

Original/PRO Series (Buildbotics) (Gen 1) Troubleshooting (X35/X50)

OnefinityCNC (Onefinity CNC Official ✅) December 6, 2022, 3:11am 11

Topic		Replies	Views
Z axis switch not found Original/PRO Series (Buildbotics) (Gen 1)	2	769	December 6, 2021
"Estopped, Switch not found" - What does this mean? (Buildbotics) Controller (Buildbotics) Discussion	0	1668	December 6, 2021
Issue with the touch probe in X axe Accessories	10	1407	November 12, 2021
Touch probe not working properly Troubleshooting (X35/X50)	3	1462	December 23, 2021
Probing X, Y, & Z Troubleshooting (X35/X50)	7	1085	September 29, 2022

Probe. Switch not found

Related topics