Router shield stl file

[Joe8573]

Can someone tell me how do I find the suck it dust boot router shield stl file onefinity supposed to be providing if this is true. Thanks!!!

[CommunityUser5]

Hey Joe,

@Joe8573

Can someone tell me how do I find the suck it dust boot router shield stl file onefinity supposed to be providing if this is true

Gladly: With the search function of this forum

@CommunityUser5

If you use the Onefinity Suckit Dust Boot or the other dust boots mentioned above that do not go up and down with the milling motor, you will notice

1. as they do not move out of the way when the milling motor moves downwards, you will break the acrylic Dust Boot Shields frequently and in this case, it is good to make your own shields and, as @AndyP already mentioned, not to use acrylic but polycarbonate/TPU instead, as recommended and described here or to buy here and here.

2. When making your own, you could design one with the opening you need, e.g. one with room for the Makita hand trim router’s shaft lock as shown here.

---