Just got my journeyman set this weekend and within 10min I knocked the brand new never even turned on monitor onto the the floor?! Nothing broke and all is well. But, believe me when I tell you I’ve never built a piece of run and gun shop furniture so fast in my life. Must’ve slapped this new an…

The new screen mount: https://www.onefinitycnc.com/product-page/auto-adjust-display-mount

@Bob_D I have been able to rotate the display 180deg using the information listed on this post from @mb0978 Flip 10" display 180 degrees One option I am considering to replace the bracket is this method from @mkngjoy Rock Solid Monitor Mount Not sure if the bracket will hold the 10" monitor due…

I stuck a small screwdriver under the corner of the mount block and it popped off the prop arm pretty easily. It’s just glued on. I bought this tablet dock and it seems to be pretty secure so far… [image] Amazon.com: iBOLT TabDock Bizmount AMPs - Heavy Duty Drill Base Mount for All 7"... …

Thanks Josh, That looks like a good stand as well. I like the idea of attaching it to the table. Thanks for the link. I see the stand part appears to be glued on as well on mine. I didn’t notice that before. Good to know so I don’t have to use the dremel. -Chris

After trying out a few options, I ended up deciding on a tablet mount from iBolt in place of the included mount from Onefinity. Thanks @Storm27m for the suggestion. This is the mount I decided on, it holds the 10" monitor without having to remove the attached magnetic bracket. It is very sturdy an…

Thanks, good post Chris. Ordered both today.

[IMG_8428] This is what I came up with…

Gotta admit I had the same issue as John. Having the cables run out the right side makes no sense and lends itself to a very dicey setup. I decided to move the entire controller and monitor to the right and on the wall. That magnetic monitor mount will never see the light of day again.

I just removed the mag mount from my display. It came off easily, too easy to tell you the truth. Popped right off with very little persuasion from a putty knife. I then used a tablet mount that grabs the display by the top and bottom. I believe it will be much more secure in this mount.

How hard was it to switch everything over to the right side?did you move the box also?

I basically had to make new cables. It’s not really hard if you have the tools (which I do because I like to sleeve my cables for the PC). If you don’t, you’ll just have to get extension cables from Onefinity after which it would be straightforward. Yes, the entire controller box got mounted on the …

That pesky monitor mount (solved)

Accessories

Techrise (Noble Design) May 2, 2022, 12:09pm 20

Does anyone have info on the new mount that is in Onefinity’s latest video? I haven’t been able to find it on their website.

Topic		Replies	Views
Confirmed Aftermarket Screens/Monitors that work with the Onefinity TouchScreen	83	21907	February 28, 2025
If you were to buy a new monitor…	32	4694	February 13, 2023
Rock-Solid Monitor Mount Accessories	13	4092	January 8, 2022
Let's move the Masso! Elite Series (Masso & Redline) (Gen 1)	10	760	October 6, 2024
7" Controller vs Larger Touch Screen Monitor Original/PRO Series (Buildbotics) (Gen 1)	83	10976	March 12, 2021

That pesky monitor mount (solved)

Related topics