I have been unsuccessful in getting the web interface to load and remain accessible on the OneFinity. Currently I have it hardwired to my network, the web browser shows “Onefinity CNC - Web Interface” but never loads unless I restart the controller at which point it will load and be accessible for a…

On your router are you seeing it actively connected via Lan or wifi when you have issues?

Yes, it’s an active device and I can ping it without issue. It’s just a loading issue that happens on PC. My iPhone can connect to it on Chrome, Safari etc. but not my PC.

Then I would say it is less likely a controller issue and more likely an issue with your laptop

I would agree if it wasn’t for the fact that the WiFi doesn’t work on the controller as well… I’ve found others on the forums with the same issue but no corrective actions yet which means it’s not an isolated case. It would also be different if it was only one browser, but using multiple browsers an…

Also, the fact I can connect to it perfectly fine when it starts up is confirmation that it’s not an issue with the PC. I shouldn’t need to restart the controller every time I want to upload a new program to it…

I am having an issue as well. I have never connected my controller to the WiFi since starting using my 1F in 2022. I recently got the z20 and was trying to simply change the settings on the controller interface. I saw that I needed to update to V1.4.1 so that the settings would register the newer m…

[image] (Optional) Connected to internet but things aren't working right fix WIFI/Network Have your controller connected to the internet but things aren’t working quite right? Do the following in order: turning off the controller. unplugging power to extender. Un…

hello, I am having kind of the same issue. Whats going on with me, I powered up my x-50 yesterday, and started a carve. I left the cnc powered up all night but paused, came back out today and started back up the carve. Still going no issues as of yet, but I just tried to log in to the web interface …

I would start by assigning the controller a static ip address on your router dhcp server. can you ping the controller?

I had a similar issue where the web interface became locked to one computer on my network. I have my 1F BB controller hooked up to my wired ethernet network and assigned a static IP address. This was before I assigned a static IP on the BB controller via SSH. After the assignment I can browse the we…

Web Interface - Failure to Load

Original/PRO Series (Buildbotics) (Gen 1) Troubleshooting (X35/X50)

OnefinityCNC (Onefinity CNC Official ✅) August 10, 2024, 1:47am 8

Topic		Replies	Views
Web interface continuously drops connection Troubleshooting (X35/X50)	34	3956	December 17, 2023
Cannot log onto web interface when using direct ethernet connection Original/PRO Series (Buildbotics) (Gen 1)	25	1790	December 13, 2023
Connecting to wired network Troubleshooting (X35/X50)	15	2871	June 13, 2023
Connecting to a wired network Uncategorized	9	3102	August 10, 2023
Network direct cabling Original/PRO Series (Buildbotics) (Gen 1)	28	1854	September 2, 2023

Web Interface - Failure to Load

Related topics