[KakaoTalk_20240327_111722174] What is the inner diameter? I’d appreciate it if you could tell me in millimeters

Do you mean the cutting size? 1219 in the “X” 965 in the “Y”

I think there is a bit of variance in the width, but front and back should be exactly the same distance. According to the setup instructions (ok, my recollection of them, which might be correct), bolt one y-axis rail down, move the x-gantry to the front, square the front, slide x-gantry to the back, then bolt down. Note that you also want the diagonal measurements to be the same, which can take a bit of tweeking if the y-rails are slightly different length. Might as well search the forum for “co-planarity” and/or “fishing line test,” as that’ll come up at some point. Dan

Hey matthew633 yiesounglee, [image]1st post. Size matters and vertical clamping for finger joints & tenons Cutting area location Spoilboard placement

What is the inner diameter?

Original/PRO Series (Buildbotics) (Gen 1)

349iq2345 March 27, 2024, 3:29am 4

Hey matthew633 yiesounglee,

Topic		Replies	Views
Cutting area location Original/PRO Series (Buildbotics) (Gen 1)	17	5413	January 14, 2022
Dimension question - front of machine to "y0" Original/PRO Series (Buildbotics) (Gen 1)	6	1211	April 29, 2024
Y rails off slightly Original/PRO Series (Buildbotics) (Gen 1)	8	1335	October 20, 2021
Bolt size for X to Y Original/PRO Series (Buildbotics) (Gen 1)	2	506	September 19, 2021
Part not fitting together (solved, user got confused which is Y and X rail) Elite Series (Masso & Redline) (Gen 1)	5	367	December 28, 2023

What is the inner diameter?

Related topics