Hello eveyone! I have just purchased an X50 CNC without a touch screen. Your answers will help me choose a touch screen that is compatible with the controler. Thank you for your help!

this is the one i got from amazon I have had zero problems [image] Amazon.com: ASUS VT229H 21.5" Monitor 1080P IPS 10-Point Touch Eye Care with... Amazon.com: ASUS VT229H 21.5" Monitor 1080P IPS 10-Point Touch Eye Care with HDMI VGA, Black : Electronics …

Hey Stéphane, here a few useful links: Confirmed Aftermarket Screens/Monitors that work with the Onefinity Criteria for a compatible Touch Monitor Thoughts on better using the monitor in portrait orientation If using a Touch Display, don’t choose one too small

[image] HardtailSr: this is the one i got from amazon I have had zero problems Thanks Robert, So with this model, you only have to connect the HDMI cable to the controller box? Do you used this thing with you CNC IoT Power Relay? See the picture [image]

I am not sure i understand your question. yes it conects via the hdmi cable and of course a power cable. I do not know what a IoT is.

You understood my question correctly. Of course the power cable must be plugged in. Do you need to plug in another cable in order to have touchscreen capability? The IoT relay starts and stops your router without your intervention during the execution of a job. Do you speak French, your name sounds …

my grand parents were from Canada the name mainville is from a little town just north of paris there is also a mainvile pennsylvania lol. and no no other cable is needed i simply turm my router on but it is plugged into a relay with my vacuum to turn the vac on several seconds after the router. as f…

[image] HardtailSr: I do not know what a IoT is. IoT stands for “internet of things”. It’s a class of devices that are connected to the internet so they can be controlled or accessed remotely. A Nest thermostat for instance is an IoT device.

Hey Stéphane, hey all, [image] Stephane: [image] External IoT relay ( FAQ ) Further Reading The good ole ‘tool-enable’ IoT Relay Breakout Board Thread

Thank you, I will consult them, because I had this module, with my Workbee 1010 Openbuils.

Hey Stéphane, [image] Stephane: Do you need to plug in another cable in order to have touchscreen capability? yes, the touch device is an input device (a HID ) that you plug into a USB port on Onefinity controller. [image] Onefinity Monitor The Monitor and the Touch are in fact two diff…

Which touch screen do you have?

Original/PRO Series (Buildbotics) (Gen 1)

CommunityUser5 April 19, 2023, 6:01pm 3

Hey Stéphane,

here a few useful links:

Confirmed Aftermarket Screens/Monitors that work with the Onefinity
Criteria for a compatible Touch Monitor
Thoughts on better using the monitor in portrait orientation
If using a Touch Display, don’t choose one too small

Topic		Replies	Views
Confirmed Aftermarket Screens/Monitors that work with the Onefinity TouchScreen	84	21709	February 28, 2025
Onefinity Monitor Original/PRO Series (Buildbotics) (Gen 1)	7	3860	September 6, 2022
Will this monitor work with my Journeyman? TouchScreen	2	1176	May 9, 2023
What screens can I use with the Onefinity CNC (with a BB Buildbotics controller) Screens (FAQ)	0	8439	November 30, 2021
If you were to buy a new monitor…	32	4639	February 13, 2023

Which touch screen do you have?

Related topics