Just assembled my onefinity journeyman elite twice! Put it all together following the videos and was playing around for a while before i flattened my waste board. Thought everything was going well and half way through the machine messed up and started moving back the opposite way of the tool path a…

What message does the alarm give? Are there error lights on any of the motors?

Its shows a Y motor alarm. I reset and do it again and it shows an X motor alarm. Someone in the FB group said that it might be in the machine settings… in the F3 page in the machine box it is showing an A position but not B position… i was just looking at the masso documents and cant see how to cha…

Please reset the configuration settings: [image] Elite Series Masso Default Machine Settings Masso Default Configuration FAQ Elite Series Masso Machine Settings: (updated: 11/3/25) Part 1, 2, and 3 must be done in order. :one:Part 1: Firmware <a name="p-61015-before-performing-the-two-steps-below-ensure-the-masso-firmware-is-513-or-later-click-here-to-learn-how-to-update-your-firmware-which-is-different-than-the-below-config-resethttpsdocsmassocomaugetting-started-guidesinstalling-massoloading-software-to-masso-touch-3" class="anchor" href="#p-61015-before-performing-the-two-steps-below-ensure-the-masso-firmware-is-513-or-later-click-here-to-learn-how-to-update-your-firmware-which-is-different-than-the-below-config-resethttpsdocsmassocomaugetting-started-guidesinstalling-massoloading-software-to-masso-touch-3"> Before performi…

I have done this a few times already. I will format the USB and load it on there again and try it.

so I just did the settings again. homed it and its still not correct. when homing i noticed as the X was moving left the Y was going backwards until the X was homed and then Y started moving forward. I checked the setting for the inverting of the motors and they seem ok. i think.

X and homing issues

Elite Series (Masso & Redline) (Gen 1)

OnefinityCNC (Onefinity CNC Official ✅) April 8, 2024, 3:29pm 4

Please reset the configuration settings:

Topic		Replies	Views
Alarm Home Error and X motor alarm Elite Series (Masso & Redline) (Gen 1)	2	527	March 24, 2024
Alarm homing error-unable to jog (solved, wrong settings in f1 screeen) Elite Series (Masso & Redline) (Gen 1)	13	664	October 4, 2024
X motor alarm and z axis falling when I push the estop Troubleshooting (Elite Series)	2	753	July 28, 2023
Elite Masso X axis motor alarm (homing sensor issue) (FAQ) Official 1F Elite (Gen 1) (MASSO) FAQs	0	1182	April 28, 2023
Setting up of the elite foreman masso x motor error Troubleshooting (Elite Series)	2	77	January 7, 2026

X and homing issues

Related topics