X-Axis Grinding and Binding (solved, bad wire connection)

[OnefinityCNC (Onefinity CNC Official ✅)]

Support: How to determine if a wire or motor is damaged

This faq is used by support to determine if a wire or motor is damaged, and how to identify each one. WARNING: DO NOT UNPLUG OR PLUG ANY WIRES IN WHILE THE CONTROLLER IS ON! YOU WILL DAMGAGE YOUR MOTOR DRIVERS AND VOID THE WARRANTY! You will need a screen and power connected during the tests. You will REMOVE power while switching wires. If you switch wires while the controller is on, you will damage the controller. Therefore, you will be powering up the controller, testing movement via the…