Y axis issues loud noise (solved, wire connection issue)

[Jgolden4455]

I am having issues with my X50 woodworker. I have been using it for over a year with no issues, but when I started carving today it was like there is something loose on one of the y axis. When it moves forward or back it seems like someone is out of whack. I am attaching a video

[OnefinityCNC (Onefinity Support)]

wire/connection issue:

Troubleshooting: Rail is getting hung, stuck, or out of alignment (x35/x50 machines)

Rail is getting hung/stuck/grinding. A rail getting stuck/hung is typically one of two things, either a wire/connection issue or the grub screw on the ball screw isn’t tight on the side that isn’t moving. One thing to remember, stall homing adjustments do NOT affect rail movement during cutting or jogging. If the rail isn’t moving correctly during cutting or jogging, incorrect stall homing is an affect of this greater issue. Note: Any time the axis moves in the opposite direction than what yo…