Every time I hit home the z axis will move up about 15mm and then the machine will estop and give me n error. ESTOPPED switch not found Any ideas? I’m also getting a no fit error on the Z. Warning: the current tool path dimensions (29.31 mm) exceed axis dimensions (10 mm) by 19.31 mm. I’m tryin…

[image] Hermsen.BJ [BJ Hermsen]( Profile - Hermsen.BJ - Onefinity CNC Forum ) 11d When you probe it only allows a short travel distance. Always get to withing about a quarter inch of the probe. This might help. I did a search for Estopped.

I searched estopped as well, this seems to be different. It isn’t while probing, the machine probes correctly. When I press the home button the z axis moves up and then I get this error. It doesn’t matter where the machine is or the current z height.

I don’t have my machine yet but remembered seeing that. Does Z move freely manually controlled?

Yep, X, Y and Z all move correctly. X and Y home properly with no errors.

The “no fit” error you were getting is probably related to the fact that Z hasn’t homed (and doesn’t know where it is yet). When you first turn on the machine and it asks if you want to home, you click “OK” and Z raises up but doesn’t successfully home? Does it try to keep raising it but makes a “…

I just tried this. I press home after turning it on and the Z moves up about 15mm and puts the machine into estop. The X and Y do not move afterwards.

Hey James, Can you give me a little more info on resetting the configuration? I am having the same error on the Y axis. Thanks

Hello Dan, not sure if you received any help or not on your issue but now mine is needing me to hit the home button multiple times and each time it barley moves then eventually after I hit home a few more times it will come to the front and to the far left as planned. Seems like most owners hit the …

Z axis ESTOPPED switch not found when homing

Original/PRO Series (Buildbotics) (Gen 1) Troubleshooting (X35/X50)

Yusuke620 (James) March 28, 2021, 4:13pm 9

1F support helped me get it working.

For anyone else who may have this issue, resetting the configuration fixed the Z problem.

Topic		Replies	Views
Z axis switch not found Original/PRO Series (Buildbotics) (Gen 1)	2	784	December 6, 2021
Test sign that came with cnc Troubleshooting (X35/X50)	3	603	November 13, 2022
Z axis will not raise on homing Original/PRO Series (Buildbotics) (Gen 1)	3	610	October 1, 2023
Z axis homing issue Troubleshooting (X35/X50)	5	4221	September 28, 2021
User triggered Estop error Uncategorized	6	744	September 8, 2023

Z axis ESTOPPED switch not found when homing

Related topics