How can I remove the magnetic kickstand mount from the back of my 10.8" display?

OF support let me know that the mag is glued on with epoxy. After a closer look I noticed a touch of space at a corner… [image] [image] [image] [image] [image]

@Watkins Thanks, your insights were very helpful to me this morning. I removed the magnet to install this mount. I am doing a trial on location before I screw it to my table. [PXL_20211205_164114276] [PXL_20211205_164437925] [PXL_20211205_173230307.PORTRAIT] [PXL_20211205_173245287.PORTR…

[image] Alphonse: I am doing a trial on location before I screw it to my table I have the same mount and did the same thing you’re doing. I ended up moving it from where I originally put it. I didn’t remove the magnet on the back of the monitor though, the mount seems to be able to hold it s…

@JimHatch Jim, we must have a different mount. Mine would not work without removing the magnet. Here’s what I bought: https://www.amazon.com/dp/B01KB19JCW?psc=1&ref=ppx_yo2_dt_b_product_details Here’s a profile shot of the back - [PXL_20211205_181946964]

@Alphonse Hey Alan, glad it was helpful. Looks like a nice table you have there.

@Watkins Thanks again and thanks for the compliment on the table. The table is a composite table built with an aluminum honeycomb panel sandwiched between sheets of RDO plywood. When I get time I will post up some details of how it was built at a local architectural millworks. It is unbelievable …

I look forward to that. I had been looking at honeycomb panels as an option for the core of a table, but had a hard time finding someone who would sell direct. Do you happen to know what thickness the core is, and which manufacturer’s panel the millwork uses?

Give me a couple of days and I will put the fabrication details and contact info up in a separate post. I have photos of the fabrication process and contact info. The millworks had the aluminum honeycomb in stock and are able to procure the honeycomb since they have a partnering relationship with …

[image] Alphonse: we must have a different mount. Mine would not work without removing the magnet Nope, same one. [PXL_20211206_002135988.MP] You can see it’s held in the lips of the bracket on the front. [PXL_20211206_002235073.MP] I Iike it because I can rotate it when I’m ready to ti…

10.8 Display: Remove the mag stand mount?

Accessories TouchScreen

clw (Chuck) June 13, 2021, 12:12am 3

Thank you, the kind of tip I’ve been looking for. Now where did I put that putty knife…

How to remove stand from 10 inch screen

Topic		Replies	Views
That pesky monitor mount (solved) Accessories	28	4223	April 4, 2023
Rock-Solid Monitor Mount Accessories	13	4076	January 8, 2022
10.8" Monitor Stand TouchScreen	26	2176	October 31, 2021
How to remove stand from 10 inch screen	4	844	June 20, 2021
Touchscreen Broken TouchScreen	9	885	December 16, 2022

10.8 Display: Remove the mag stand mount?

Related topics